KOVA Metallic Emulsion Paintis a water-based emulsion paint that, when applied to all surfaces, creates a high-gloss finish, the surface with a golden metallic luster effect. This paint finish is durable over time, can withstand harsh weather and can be used to decorate special structures: religious buildings, temples, monuments, hotels, centers commercial center, amusement park, etc…
SUPERIOR CHARACTERISTICS
Completely water-based (superior safety compared to conventional oil-based emulsion paint products because it does not contain harmful chemicals).
Extremely resistant to ultraviolet rays and weather changes, colorfast, mildew resistant.
High gloss, iridescent surface with the metallic luster of precious metals such as gold, silver, copper.
Non-flammable, non-toxic, does not contain lead, mercury and other harmful chemicals, safe for construction and use.
PRODUCT INFORMATION
Packing : Can 1kg Applicable surface:Concrete surface, cement mortar, plaster, wood. Emulsion paint can be sprayed on thorn paint, brocade paint, metal, plastic composite Theoretical norm: 5.0 - 6.0m 2 /kg/ 02 layers. Depending on construction requirements, surface and construction techniques Dry Thickness: Average dry thickness: 25-35 m/1 layer Tools: Pressure spray gun
SURFACE PREPARATION
Metal must be anti-rust with water-based anti-rust paint KOVA KG-01 before applying primer for emulsion paint.
Concrete, cement, plaster must be absolutely flat.
New walls: must be allowed to dry and stabilize the structure (minimum 12-15 days), clean from dust and dirt.
Old wall: must remove grease, moss, paint layers, old lime, then wash thoroughly with clean water and let dry.
CONSTRUCTION
Step 1: Clean the surface of the mortar to ensure there is no dirt or grease that reduces the adhesion of emulsion paint, rough walls or concrete must be ground relatively flat. Step 2: Apply 2 coats of Mastic (indoor/outdoor) to smooth the construction surface, each layer of Mastic is 3-4 hours apart (If not flat, the emulsion paint will not look good). Step 3: Apply 01-02 coats of primer, let dry for 3-4 hours. Step 4: Apply 02 layers of emulsion paint by spray gun, each layer is at least 3-4 hours apart. Allow to dry for at least 8 hours before using.
NOTE :
It is recommended to use a suitable spray gun to create a beautiful, smooth paint film that does not spill the color.
Do not use rollers, brushes to apply because it reduces the gloss and brightness of the paint film.
SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION
The working environment must be well ventilated. Wear gloves, masks and eye protection while working. In case of eye contact, wash with plenty of clean water and consult a doctor immediately. Please refer to the latest technical and safety documentation before use.
Đại lý có tài khoản vui lòng đăng nhập để mua hàng hoặc đăng ký tài khoản (tại đây).
Nếu bạn chưa là đại lý trong hệ thống Cường Lâm vui lòng liên hệ chúng tôi (tại đây).
