PRODUCT DESCRIPTIONKOVA SK6 moisture-resistant masticis a 2-component mastic made from hydrophobic (Hydrophobic) monomers, resistant to moisture thanks to the hydrophobicity in the molecular formula. Good adhesion on all surfaces of concrete, cement, brick... Can be used to cover masonry walls, skirtings, floors, yard floors or as a screed for floor tiles, for all applications. both civil and industrial constructions
SUPERIOR CHARACTERISTICS
Easy to construct.
Has anti-cracking, waterproof, anti-alkali effect.
Resistant to wet environments, light back pressure waterproofing for baseboards, yellowed walls, and floors.
Prevents water from penetrating through the seals.
Able to insulate and resist heat for exterior walls and floors.
Compatible with all paints.
Fast drying, easy to use, highly economical because the amount of mastic loss when sanding is very little compared to other common mastic types.
Non-flammable, non-toxic, free of lead, mercury and other harmful chemicals, safe for construction and use
PRODUCT INFORMATION Packing: 10kg set (liquid component 3.7kg – powder part 6.3kg) Applicable surface: Good compatibility with all paints and surface materials Theoretical norm:0.6 – 1.0 m2/kg (for 1 layer), depending on the surface of the material.
CONSTRUCTION INSTRUCTIONS
SURFACE PREPARATION
All surfaces must be dry and free of dirt, grease, moss, lime, old paint.
For new walls or new foundations, it is necessary to wait at least 12-15 days for the cement structure to stabilize before applying mastic.
For tennis courts, concrete must be allowed to dry for a minimum of 21 days.
It is necessary to moisten the surface of the material before applying mastic SK-6.
CONSTRUCTION
Step 1: Mix the powder component into the liquid component into a homogeneous paste. If it is thick, it can be mixed with enough water to make it easy to apply (When mixing the two components, it must be applied within 1 hour, after that time the mastic will harden and the quality will decrease. there).
Step 2: Use a trowel to apply 2-3 layers of SK-6 mastic, each layer is spaced 6-8 hours apart (can be left overnight).
Step 3: Allow to dry for at least 8-12 hours, sand the surface to be flat and smooth. Wipe off the mastic dust, before proceeding with the paint roller.
NOTE
Allow layer SK-6 to dry for at least 1 day before applying the next steps. If the mastic is dry or too thick, you can add about 5 - 15% water during use
SAFETY, HEALTH AND ENVIRONMENTAL INFORMATIONThe working environment must be well ventilated. Avoid contact with skin or eyes. Wear gloves, masks and eye protection while working. In case of eye contact, wash with plenty of clean water and consult a doctor immediately. Please refer to the latest technical and safety documentation before use.
Đại lý có tài khoản vui lòng đăng nhập để mua hàng hoặc đăng ký tài khoản (tại đây).
Nếu bạn chưa là đại lý trong hệ thống Cường Lâm vui lòng liên hệ chúng tôi (tại đây).
