KOVA CITY PREMIUM EXTERIOR POWDER

Bột trét ngoại thất cao cấp
690.000 VND
Xuất Xứ: Việt Nam

PRODUCT DESCRIPTION

KOVA CITY EXTERIOR POWDER is a putty designed to smooth exterior walls before coating, has been fully tropicalized, suitable for most types of construction.

SUPERIOR CHARACTERISTICS

  • Smooth surface.
  • No blistering.
  • Durable. Good moisture resistance.
  • Resistant to outdoor weather changes.
  • Tightly bonded with the capillaries of concrete and cement mortar, giving good adhesion.
  • Flatten concave surfaces, reduce the consumption of paint coatings for exterior walls and ceilings

PRODUCT INFORMATION

Pack: Bag 40kg Applicable surface: Cement mortar, concrete, brick, plaster ceiling. Dry Thickness: About 1-1.3 mm/2 layers. Do not apply too thick powder because it will reduce the durability of the entire coating system
Theoretical rating: 31-40 m 2 /bag 40kg (for 2 layers). Depending on construction requirements, surface and construction techniques.

CONSTRUCTION INSTRUCTIONS

SURFACE PREPARATION

  • New wall: must be allowed to dry and stabilize the structure. Clean dirt.
  • Old wall: must remove grease, moss, paint layers, old lime, then wash thoroughly with clean water and let dry

CONSTRUCTION

  • Step 1: Mix putty and clean water in the ratio of about 16-20 liters of clean water/bag. Add the putty slowly into clean water and stir thoroughly until the consistency is medium (a mixer is recommended). Let stand for 5 minutes, then stir again until homogeneous. Depending on the weather, if it is too thick, you can add a little water to make it easier to spread.
  • Step 2: Use a trowel from 1-2 layers, each layer spaced from 3-4 hours. After 6-8 hours, use sandpaper to flatten, blow away dust, can apply primer.

NOTE

  • The water used to make mastic is absolutely clean water. Do not use dirty or contaminated water.
  • If the wall has cracks, it must be filled with elastic waterproofing CT-14 first.
  • If the weather is too dry, it is necessary to moisten the wall before applying putty.
  • Plaster should not be applied too thickly because it will reduce the durability of the entire coating system.
  • Use wherever you want to mix. Should be applied within 60 minutes to avoid setting.
  • Do not add other powders to KOVA putty.
  • Clean tools with clean water immediately after use.

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION


Đại lý có tài khoản vui lòng đăng nhập để mua hàng hoặc đăng ký tài khoản (tại đây).

Nếu bạn chưa là đại lý trong hệ thống Cường Lâm vui lòng liên hệ chúng tôi (tại đây).

×

Net Orders Checkout

Item Price Qty Total
Subtotal 0 VND
Shipping
Total

Shipping Address

Shipping Methods