CT-04 HIGH-GRADE EXTERIOR PAINT WITH DURABLE COLOR

PRODUCT DESCRIPTION

HIGH-CLASS exterior paint meets all COLOR needs
THE MOST LONG-LASTING COLOR .

SUPER COLOR LASTING
o Reduces the impact of UV rays on the paint film, helping the paint film not to fade.
chalking, fading
o Improved waterproofing properties help the paint film not to be permeable to water
(limits paint film from aging quickly, easily attracting dust & mold)
o Improve the product's alkali resistance (limit the condition of
uneven color
GOOD DUST RESISTANCE (With good surface adhesion, helps to cover
holes on the wall surface, anti-water stains), keep the construction always
like new
HEAT REDUCTION – The paint film reflects sunlight, reducing surface temperature.
and cooling for the project
ANTI-ALGAE & MOLD – Long lasting protection against attack
algae and mold in tropical climates.
Non-toxic, free of lead, mercury and other toxic chemicals, safe
safe for both constructors and users.

REASONS TO TRUST

Innovative formula for long lasting color that won't fade
the effects of UV rays and harsh weather
Paint film color difference index ΔE ≤ 1 after 400 hours of exposure
different effects of weather.
Solar Reflectance Index = 91.57 (Quattest 3 Certificate)

PRODUCT INFORMATION

Surface preparation

• Old walls must be scraped off of grease, moss, old paint and lime layers, then washed thoroughly with clean water and left to dry.
• New walls must be allowed to dry and structurally stabilize (at least 12-15 days). Clean dust and dirt.
• If you need to level the wall, use Putty/Mastic.
• The mortar surface must use Outdoor Alkali Resistant Primer before applying topcoat.
• To prevent wall seepage, the product CT-11A Plus Wall Waterproofing is recommended.

Construction

Step 1 : Add clean water (absolutely no cement) to the right consistency depending on temperature and humidity:

• Light color - white: add 10-15% water.
• Dark color: mix 0-5% water because dark color paint has higher fluidity than light color - white.
• Stir again until paint is uniform.

Step 2 : Apply 2 coats of primer to the surface. Each coat should be 3-4 hours apart.

SAFETY, HEALTH AND ENVIRONMENT INFORMATION

The working environment must be well ventilated. Wear gloves, mask and eye protection during application. In case of contact with eyes, rinse with plenty of clean water and seek medical attention immediately. Please refer to the latest technical and safety data sheets before use.